MIT-70G-4856BDNNH



MIT-70G-4856BDNNH

  • 802.3at PoE
  • DC/DC, 802.3at Gigabit PoE Injector with 40 to 60V DC Input and 56V/0.625A Output, -40C~+70C
  • Country of Origin: Taiwan


Request a quote

Specifications
Document
Specifications

  • INPUT :

    • Input Voltage: 40Vdc to 60Vdc Normal = 48V 
    • Input Current: 0.89A at 48Vdc; 1.00A at 40Vdc; 0.70A at 60Vdc       
    • *Note: The model isolated design, both positive and negative input are all available.

  • OUTPUT :

    • Output voltage and current: +56V
    • Max load: 0.625A
    • Power: Output 35W maximum
    • Minimum load: 0.01A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 1%
    • Total power: 35W
    • Noise bandwidth is from DC to 20Mhz. 
    • Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point. 
  • Efficiency : 82% min at Full Load , 18Vdc to 36Vdc Input Voltage  

  • Protection :

    • Short Circuit Protection
    • Output Short GND Terminal will not damage the Power Supply and will Auto-Reset
    • Input with Fuse Protection.
    • Safety Standard : meet IEC 62368-1.
    • EMC : meet FCC Class B , EN55032 Class B
    • IEEE 802.3at compliant
    • Over Current : 120% ~ 160% @24Vdc Input F.L
    • Input Polarity Reverse Protection ——NO Work
    • Input Over Voltage Protection : 72.3V ~ 72.8V Turn-off Input Voltage.
    • Input Over low Voltage Protection : 33.1V ~ 33.8V Turn-off Input Voltage.

  • General description :

    • Operating temperature: -40 to 70 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5% – 90% non-condensing
    • Free air cooling
    • Dimensions: 125*72*38 (L)*(W)*(H) unit: m/m
    • RJ-45 input (data only) and RJ-45 output (data & power)
    • RJ45 Connection and pin out: @100MBASE 
    • RJ45 Connection and pin out: @1000MBASE
    • Plastic case material: PC
    • Plastic case finish: texture
    • Plastic case color: gray/black

  • Indicator:

    • the LED lights RED means Power Ready
    • the LED lights GREEN means Output 802.3af or 802.3at OK

Document