Key Specifications/Special Features:
MIT-44GS is a DC/DC PoE (Power-over-Ethernet) injector, provide up to four different voltage DC input and four different voltage PoE output, output power maximum 1A/port, data rate can be 10M/100M/1000M
Polarity of each PoE output can be reversed if you need to reverse the output polarity
This manual will help you to install and setting the PoE injector
Installation of the PoE injector is very easy and you can start to use the product as soon as you are powered up
The bottom ports 1-4 on the front panel are used for carry PoE output
Normally as detailed below:
- Data pair A on line 1 and 2
- Data pair B on line 3 and 6
- Data pair C plus V+ on line 4 and 5
- Data pair D plus V- on line 7 and 8
- Data rate: 10M/100M/1000Mbps
- Input voltage: -12 to -57V DC
- Maximum PoE power: current limited – 1A/port
- PoE protection: over-current, over/under voltage
- LEDs: green-PD detect, red-power ready, off-No power apply
- Operating temperatures: -40 to 70℃
- Operation humidity: 90% relative humidity, non-condensing
- Storage temperatures: -40 to 85℃
- Dimensions: 40 x 118 x 90mm, available for DIN RAIL mounted
Documents:
- View Specification (502 KB)