|

PSE-SW8G44D0++

Pse Sw8g44d0++
  • 802.3at PoE
  • 8-port Gigabit PoE Switch, 48VDC input, 7x LTPoE++ PoE output, 70W/Port, backward compliant 802.3af/at
  • Country of Origin: Taiwan

Technical Specifications

Standards: IEEE802.3/IEEE802.3u standards/IEEE802.3ab (10base-T/100base-TX/1000base-T)
Ports: 8 Ethernet ports, 7 ports with PoE (LTPoE++ PSE), support auto-crossover & auto-polarity
Transmission speed: 1000Mbps (1000base-T).100 Mbps (100base-TX), 10 Mbps(10base-T) Auto-negotiation
Switch technology: store-and-forward
Protocols: CSMA/CD
Flow control: IEEE802.3x (full-duplex), back pressure (half-duplex)
Data transmission rate: 1488000pps for 1000base-T, 148800pps for 100base-T, 14880pps for 10base-T
Address table: 8K MAC address table, self-learning
Connect: RJ-45
PoE port:
Port 1-7, PSE auto power management

Pin assignment:
data pair A plus V+(1,2)
data pair B plus V-(3,6)
data pair C plus V+(4,5)
data pair D plus V-(7,8)
Maximum PoE power:
Port 1-7: IEEE802.3af – 16.8W
IEEE802.3at – 35W
LTPoE++ – 70W PD
PSE disconnect mode: DC disconnect
PoE auto detection: IEEE802.3af , IEEE802.3at (2 event classification signaling) & LTPoE++
PoE protection: Over-temperature, over-current, over/under voltage
LEDs:
*Link/Activity (Green ON/ Green Blinking @1000Mbps, Yellow/Yellow Blinking @10M/100Mbps)
*PoE (Yellow): port 1-7 ON – PD detect;Port 8 unused

Power input:
DC power supply on rear terminal
IEEE802.3af 44V~57V
IEEE802.3at 51V~57V
LTPoE++ 55V~57V
Power consumption: less 5W without PD loading
Power efficiency: 83% at full load
Operating temperature: -20℃~ +70℃
Operation humidity: 90% relative humidity, non-condensing
Storage temperature: -30℃~+85℃
Dimension: 40mm(H)x190mm(W)x119mm(D)

View Specification (1.8 MB)