• 802.3at PoE
  • 48VDC Input 70W Output High-power 802.3at PoE Injector operation temperature -40C~+70C
  • Country of Origin: Taiwan

Input Voltage: 36Vdc to 72Vdc Normal = 48V
Input Current: 1.82A at 48Vdc @ Full Load

Output voltage and current: +56V1, +56V2
Max load: 0.625A
Power: 35W maximum
Minimum load: 0.01A
Load regular percentage: 5%
Line regular percentage: 1%
Ripple percentage: 1%
Noise percentage: 1%
Total power: 70W
Noise bandwidth is from DC to 20Mhz. Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Output up to 70W at 40C. De-rate output power by 1W for every 1 deg C rise above 40C up to 70C. Example: 60W at 50C, 50W at 60C.
Efficiency: 80% min at Full Load , 36Vdc ~ 72Vdc Input Voltage

Short Circuit Protection
Output Short GND Terminal will not damage the Power Supply and will Auto-Reset
Input with Fuse Protection.
Safety Standard : meet UL1950, CSA 22.2 & TUV EN60950-1
EMC : meet FCC Class B , EN55022 Class B
Over Current : 120% ~ 160% @48VDC Input F.L
Input Reverse Protection——NO Work

General description:
Operating temperature: -40 to 70 degree Celsius
Storage temperature: -40 to 85 degree Celsius
Operating humidity: 5% – 90% non-condensing
Free air cooling
SIZE : 125*72*38 (L)*(W)*(H) unit: m/m
DIN rail mountable : DIN rail clip kit optioned
RJ45 Pin Assignment: @1000M
RJ-45 PoE input (data only) and RJ-45 PoE output (data and power)

the LED on top cover light GREEN when Power Ready
the LEDs on right RJ45 light GREEN when powering is OK, the left LED ON means the spare pairs powering, the right LED ON means the signal pairs powering.

View Specification (435 KB)