|

MIT-33G-24BNN


  • Passive
  • AC/DC, 1G/5Gigabit, Passive POE Injector with 48W output and Surge Protection
  • Country of Origin: Taiwan

Key Specifications/Special Features:
  • INPUT :
    • Input voltage: AC 100V ~ 240V
    • Input current: 1.0A at 100Vac @F.L  ; 0.6A at 240Vac @F.L
    • Input Frequency: 50 ~ 60hz
    • Inrush current: 25A Max at 120Vac & 50A Max at 230Vac
  • OUTPUT :
    • Output voltage and current: +24V
    • Max load: 2A
    • Power: 48W maximum
    • Minimum load: 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 2%
    • Total power: 48W
    • Ripple & Noise bandwidth is from DC to 20Mhz.
    • Terminated With a 47uF Capacitor and 0.1uf MPE Capacitor of Proper Polarity.
    • Output up to 2.0A @25C. De-rate output power when ambient temperature rise, 1.5A @70C
  • Efficiency: 85% min. at AC 100V ~ 240V Input @F.L
  • Protection:
    • Short-circuit protected
    • Output Short GND Terminal will not damage the Power Supply
    • Auto Recover when Load status going to normally
    • Over Voltage Protection : 30V ~ 33V
    • Over Current limit: 120% ~ 140% @100V ~ 240Vac
    • Input with Fuse Protection
  • EMC : Meet FCC Class B EN55032 Class B
  • SAFETY STANDARD : Meet IEC/EN62368-1
  • General description:
    • Operating temperature: -40 to +50 degree Celsius
    • Storage temperature: -40 to +85 degree Celsius
    • Operating humidity: 5 to 90%
    • Free air cooling
    • Size: 125*72*38 mm (L)*(W)*(H)
    • DIN rail mountable by clip kit (option)
  • RJ45 Pin Assignment: @1000/5000M
  • RJ-45 input (data only) and RJ-45 output (data & power)
  • Indicator:
    • LED (GREEN) indicates POE Output OK
  • Power Output to P4,P5 & P7,P8 for Full Load.
  • Surge protection on data input ports.

Documents: