MIT-33G-56BNN
- Passive
- AC/DC, 1G/5Gigabit PoE Injector with 56V/50W Output, and Surge Protection
- Country of Origin: Taiwan
Key Specifications/Special Features:
- INPUT :
- Input voltage: AC 100V ~ 240V
- Input current: 1.2A at 100Vac @F.L ; 0.7A at 240Vac @F.L
- Input Frequency: 50 ~ 60hz
- Inrush current: 25A Max at 120Vac & 50A Max at 230Vac
- OUTPUT :
- Output voltage and current: +56V
- Max load: 1.07A
- Power: 60W maximum
- Minimum load: 0A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 2%
- Total power: 60W
- Ripple & Noise bandwidth is from DC to 20Mhz.
- Terminated With a 47uF Capacitor and 0.1uf MPE Capacitor of Proper Polarity.
- Efficiency: 81% min. at AC 120V ~ 230V Input @F.L
- Protection:
- Short-circuit protected
- Output Short GND Terminal will not damage the Power Supply
- Auto Recover when Load status going to normally
- Over Voltage Protection : 59V ~ 63V
- Over Current limit: 150% ~ 200% @100V ~ 240Vac
- Input with Fuse Protection
- EMC : Meet FCC Class B EN55032 Class B
- SAFETY STANDARD : Meet IEC/EN62368-1
- General description:
- Operating temperature: -40 to 50 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5 to 90%
- Free air cooling
- Size: 125*72*38 mm (L)*(W)*(H)
- DIN rail mountable by clip kit (option)
- RJ45 Pin Assignment: @1000M
- RJ-45 input (data only) and RJ-45 output (data & power)
- Indicator:
- LED (GREEN) indicates POE Output OK
Documents:
- View Specification (142 KB)
- Installation Guide (80 KB)