MIT-33G-56D2N

Key Specifications/Special Features
Functions: transforms AC power to 56V DC power
Injects 56V DC through a CAT 5 cable, use all 4 pairs into remote devices such as wireless AP, IP phone, web camera and other functions.

INPUT :
Input voltage: AC 100V ~ 240V @120V/230V
Input current: 1.03A at 120Vac @F.L
Input Frequency: 50 ~ 60hz
Inrush current: 25A Max at 120Vac & 50A Max at 230Vac

OUTPUT :
Output voltage and current: +56V
Max load: 1.07A
Power: 60W maximum
Minimum load 0A
Load regular percentage: 5%
Line regular percentage: 1%
Ripple percentage: 1%
Noise percentage: 2%
Total power: 60W
Noise bandwidth: from DC to 20Mhz.
Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Efficiency: 81% min. at AC 120V ~ 230V Input @F.L

Protection:
Short-circuit protected
Output Short GND Terminal will not damage the Power Supply
Auto Recover when Load status going to normally
Input fuse protection
Over Voltage Protection : 59V ~ 63V
Over Current limit: 150% ~ 200% @90V ~ 264Vac
EMC : Meet FCC Class B EN55032 Class B
SAFETY STANDARD : Meet IEC/EN62368-1

General description:
Operating temperature: -40 to 50 degree Celsius
Storage temperature: -40 to 85 degree Celsius
Operating humidity: 5 to 90%
Free air cooling
Size: 125*72*38 mm (L)*(W)*(H)
DIN rail mountable by clip kit (option)
RJ45 Connected and pin out: @1000MBASE
RJ-45 input (data only) and RJ-45 output (data and power)

Indicator:
LED light on RED indicates PWR ready.
LED light on GREEN indicates POE output OK to 802.3at or 802.3af PD
Mechanical and dimensions:
Plastic case material: PC
Plastic case finish: texture
Plastic case color: gray/black
Plastic case dimensions: 125 x 72 x 38mm

Documetns:

• View Specification (136 KB)
•  Installation Guide (80 KB)