|

MIT-36G-56DBNM

Mit 36g 56dbnm
  • 802.3bt PoE
  • 56V/70W Ultra High-power Gigabit PoE Injector with 10-60V DC Input, -40C~+70C
  • Country of Origin: Taiwan

WIRAKOM - Quote Form





Key Specifications/Special Features:
  • INPUT :
    • Input Voltage: DC : 10V ~ 60V
    • Input Current : 8.17A @10Vin at full load / 6.72A @12Vin at full load / 3.29A @24Vin at full load  / 1.61A @48Vin at full load / 1.30A @60Vin at full load
  • OUTPUT :
    • Output voltage and current:  56V
    • Max load: 1.25A
    • Power: 70W maximum
    • Minimum load: 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 1%
    • Noise percentage: 1%
    • Total power: 70W
    • Noise bandwidth is from DC to 20Mhz. Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
  • Efficiency:   85% min at Full Load , 10Vdc ~ 60Vdc Input Voltage
  • Protection:
    • Short Circuit Protection
    • Ooutput Short GND Terminal will not damage the Power Supply and will Auto-Reset.
    • Input with Fuse Protection.
    • Over Current : 110% ~ 120% @all DCV Input F.L
    • Input polarity Reverse Protection—— will not damage the Power Supply, NO work.
    • Input Over low Voltage Protection : 8V ~ 9V Turn-off Input
  • General description:
    • Operating temperature: -40 to 70 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5% – 90% non-condensing
    • Free air cooling
    • SIZE : 40mm(H)x139mm(W)x86mm(D)
    • RJ45 pin out assignment: (10M/100M/1000M/5000M)
    • RJ-45 PoE input (data only) and RJ-45 PoE output (data & power)
    • 802.3BT class 8 output on all 4 pairs.
  • Indicator:
    • LED STB(RED) Indicate POE no output, no valid PD detected.
    • LED PSE(GREEN) Indicate POE Output for valid PD

Documents: