|

MIT-61-48P05USB-FMIT-61-48P05USB-F


  • 802.3at PoE
  • PoE to USB+PoE, USB Charger, 802.3af/at PoE Input, 48V PoE + 5V 2.4A USB Dual Output, meet BC1.2
  • PoE to USB+PoE USB Charger
  • 802.3af/at PoE Input
  • 48V PoE + 5V 2.4A USB Dual Output
  • meet BC1.2

  • INPUT :
    • Input Voltage:   1. DC40V to DC60V NORMAL= 56V      2. 802.3at
    • Under Voltage Lockout: DC -34V±1V
  • OUTPUT :
    • Output voltage and current:  Output 1: 5.05V , Output 2: 48V (Vo=Vi)
    • Max load: Output 1: 2.4A , Output 2: 0.38A
    • Power: Output 1: 12W maximum , Output 2: 18W maximum
    • Minimum load: 0A
    • Load regular percentage: 5%
    • Line regular percentage: 1%
    • Ripple percentage: 2%
    • Noise percentage: 5%
    • Total power: 30W
    • Ripple & Noise bandwidth is from DC to 20Mhz.
    • Terminated With a 47uF Capacitor and 0.1uf MPE Capacitor of Proper Polarity.
  • Efficiency : 80% min @all Vin dc
  • Protection :
    • Short Circuit Protection
    • Output Short GND Terminal will not damage the Power Supply and will Auto-Reset (Only 5VUSB output 1)
    • Operation frequency is 125KHZ (min)
    • Isolation Voltage : 1500Vdc
    • Isolation Resistance :100M ohms (min)
    • Input Set class Resistance : 25K ohms
    • Maximum Capacitive Load : 470UF
    • POE OUT Voltage and POE IN is the same.
  • General description :
    • Operating temperature: -25 to 50 degree Celsius
    • Storage temperature: -40 to 85 degree Celsius
    • Operating humidity: 5% – 90% non-condensing
    • Free air cooling
    • Dimensions: 65x45x26 (L*W*H)m/m
    • RJ-45 PoE input 10/100M (data and power) and RJ-45 PoE output 2 (data and power)
  • USB Charger :
    • Supports USB Battery Charging Specification 1.2 (BC1.2 Charging Spec up to 1.5A)
    • Supports Apple® Device fast charging (up to 2.4A)
    • SupportsSamsung Galaxy Tab Devices charging (up to 2.1A)
    • SupportsChinese Telecommunications Industry Standard YD/T 1591-2009
    • Automatic charging detection circuit for Apple, Samsung, and BC compliant devices
  • Connector :
    • Vin RJ45
    • Vout USB female + RJ45 female
    • RJ45 input/output shield connect to FG together

File Download 1 (344 KB)