MIT-69G-1248BDNN
- 802.3af PoE
- DC/DC Gigabit PoE Injector with 10-36V DC Input Voltage and 0.35A Maximum Load
INPUT :
Input Voltage: 10Vdc to 36Vdc
Input Current: 2.52A at 10Vdc / 0.64A at 36Vdc
OUTPUT :
Output voltage and current: +48V
Max load: 0.35A
Power: 17W maximum
Minimum load: 0.01A
Load regular percentage: 5%
Line regular percentage: 1%
Ripple percentage: 1%
Noise percentage: 1%
Total power: 17W
Noise bandwidth is from DC to 20Mhz.
Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
Efficiency: 72% min at Full Load , 10V ~ 36Vdc Input Voltage
Protection:
Short Circuit Protection
Output Short GND Terminal will not damage the Power Supply and will Auto-Reset
Input with Fuse Protection.
Safety Standard: meet UL1950, CSA 22.2 & TUV EN60950.
EMC : meet FCC Class A, EN55032 Class A,
Over Current : 120% ~ 160% @12Vdc Input F.L
Input Pin & Reverse Protection——NO Work
Non-isolated I/O
General description:
Operating temperature: -25 to 45 degree Celsius
Storage temperature: -40 to 85 degree Celsius
Operating humidity: 5% – 90%
Free air cooling
Dimensions: PC case (MIT-69G-1248BDNN): 85*78*36 (L)*(W)*(H)
Indicator:
Output Ready the LED will be “RED”
Output 802.3af OK the LED will be “GREEN
Connection:
RJ45 Connected and pin out: @1000MBASE
RJ-45 input (data only) and RJ-45 output (data & power)