MIT-70G-1256BDNNH
- 802.3at PoE
- DC/DC, 802.3at Gigabit PoE Injector with 10 to 15VDC Input, 56V/0.625A Output, -40C~+70C
- Country of Origin: Taiwan
- INPUT :
- Input Voltage: 10Vdc to 15Vdc Normal = 12V
- Input Current: 3.6A at 12Vdc; 4.2A at 10Vdc; 2.8A at 15Vdc
- OUTPUT :
- Output voltage and current: +56V
- Max load: 0.625A
- Power: Output 35W maximum
- Minimum load: 0.01A
- Load regular percentage: 5%
- Line regular percentage: 1%
- Ripple percentage: 1%
- Noise percentage: 1%
- Total power: 35W
- Noise bandwidth is from DC to 20Mhz.
- Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.
- Efficiency : 82% min at Full Load , 10Vdc to 15Vdc Input Voltage
- Protection :
- Short Circuit Protection
- Output Short GND Terminal will not damage the Power Supply and will Auto-Reset
- Input with Fuse Protection.
- Safety Standard : meet IEC 62368-1.
- EMC : meet FCC Class B , EN55032 Class B
- IEEE 802.3at compliant
- Over Current : 120% ~ 160% @12Vdc Input F.L
- Input Polarity Reverse Protection ——NO Work
- Input Over Voltage Protection : 15.3V ~ 15.8V Turn-off Input Voltage.
- Input Over low Voltage Protection : 8.8V ~ 9.3V Turn-off Input Voltage.
- General description :
- Operating temperature: -40 to 70 degree Celsius
- Storage temperature: -40 to 85 degree Celsius
- Operating humidity: 5% – 90% non-condensing
- Free air cooling
- Dimensions: 124*74*33 (L)*(W)*(H) unit: m/m DIN rail mountable
- RJ-45 input (data only) and RJ-45 output (data & power)
- RJ45 Connection and pin out: @100MBASE
- RJ45 Connection and pin out: @1000MBASE
- Plastic case material: PC
- Plastic case finish: texture
- Plastic case color: gray/black
- Indicator：
- the LED lights RED means Power Ready
- the LED lights GREEN means Output 802.3af or 802.3at OK